High tensile hex head full threaded bolt of size M16X110 mm, pitch 2 mm (coarse), grade 10.9 or higher with two plain washer of ID 17 mm, OD 30mm & thickness 3mm; one spring washer ID 16 mm, OD 25 mm & thickness 3 mm; and two hex nut, confirming to IS 1364 for nut and bolt; IS 3063 for washer, along with split pin of size 3x50 mm confirming to IS 549. Split pin hole of dia 3.3 mm at a distance of 5 mm from free end. (Note: Supplier should provide material duly tested for load as per IS 1367)

TEB ID: TEB/2026/F/03941493

High tensile hex head full threaded bolt of size M16X110 mm, pitch 2 mm (coarse), grade 10.9 or higher with two plain washer of ID 17 mm, OD 30mm & thickness 3mm; one spring washer ID 16 mm, OD 25 mm & thickness 3 mm; and two hex nut, confirming to IS 1364 for nut and bolt; IS 3063 for washer, along with split pin of size 3x50 mm confirming to IS 549. Split pin hole of dia 3.3 mm at a distance of 5 mm from free end. (Note: Supplier should provide material duly tested for load as per IS 1367)

High tensile hex head full threaded bolt of size M16X110 mm, pitch 2 mm (coarse), grade 10.9 or higher with two plain washer of ID 17 mm, OD 30mm & thickness 3mm; one spring washer ID 16 mm, OD 25 mm & thickness 3 mm; and two hex nut, confirming to IS 1364 for nut and bolt; IS 3063 for washer, along with split pin of size 3x50 mm confirming to IS 549. Split pin hole of dia 3.3 mm at a distance of 5 mm from free end. (Note: Supplier should provide material duly tested for load as per IS 1367)

• 5592211.pdf
• 5656125.pdf
• NIT